You are Here:
Where Technology and Tradition Meet
Blow molds that meet your specifications, high quality standards, and manufacturing excellence
(905) 678-2341
Email us for more information
What are the different blow mold options?
Monday, October 1, 2012
posted by admin

There are three common blow mold manufacturing processes.  Extrusion blow molds, injection blow molds, and stretch blow molds are the three most common and well known manufacturing options.   Extrusion blow molding is perhaps the simplest type of blow molding.  The process occurs by inserting plastic material from an extruder, and then water cooled in [...]

What to look for when you are selecting your Injection Blow Mold Supplier?
Monday, September 24, 2012
posted by admin

When selecting your blow mold manufacturer you should focus on three main areas.  Quality, testing assurance, and testimonials are three main areas you should be focusing on.  While many will talk about price, it should be a minor consideration but we will talk more about that as well.   Starting with quality, we all understand [...]

What is injection blow molding?
Wednesday, August 22, 2012
posted by admin

Many people are aware that there are different molding systems, but few clearly understand the unique properties of each type.  The process of injection blow molding (IBM) is used for the production of hollow glass and plastic objects in large quantities. In the IBM process, the polymer is injection molded onto a core pin; then [...]

Why should I use injection molding to manufacture?
Wednesday, August 15, 2012
posted by admin

Injection blow molding is the process of injecting plastic resins into a mold to form a wide variety of products.  Plastic injection molding can create surprisingly cost-effective solutions. The efficiency of injection blow molds makes the manufacturing costs lower than other types of manufacturing.   Injection molding also allows for less waste, reducing production costs as [...]

IBM Tooling Maintenance Procedures
Wednesday, June 6, 2012
posted by admin

The following are recommended maintenance for IBM tooling after each production run.  In the case of long production runs, we recommend a scheduled shut down of 1 hour throughout the run to check & clean the mold.   90% of all repairs to IBM tooling is a result of accumulated dirt in the mold.   • Clean [...]

NPE 2012 Overview
Tuesday, April 24, 2012
posted by admin

Our exhibit at the NPE 2012 was a success story for Blow Mold Tooling. We were very pleased to see new faces and potential customers stopping by to chat. Also, it’s always nice to see existing customers and learn what’s new with the companies they represent. The show itself was large and fascinating; it’s always [...]

Tips, news, and information related to blow molds
Monday, December 26, 2011
posted by admin

Blow Mold Tooling Inc. provides information to help you understand various topics related to injection blow molding, stretch blow molding, and extrusion blow molds. From design to development to manufacturing, let us share our knowledge with you.   Contact us for product information   Connect with us on YouTube   Follow us on Twitter